Data Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
DATA
Number of Channels 4
Data Communication
RS-232, RS-422, and RS-485 (2-wire/ 4-wire),
Manchester, and Bi-Phase
Maximum Baud Rate 250 Kbps
Operating Mode Simplex or full-duplex
Bit Error Rate <1 in 10-
9
at maximum optical loss budget
ELECTRICAL
Power
Surface Mount 8 to 15 VDC at 4 W
Rack Mount Provided by rack
Current Protection Automatic resettable solid-state current
limiters
LED Indicators Received Data, Transmitted Data, Optical
Carrier Detect
MTBF >100,000 hours
Circuit Board Meets IPC standards
MECHANICAL
Connectors
Power Terminal block
Optical ST or FC
Data Terminal block
Number of Rack Slots 2
GENERAL
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0% to 95%, noncondensing
Dimensions 15.5 × 13.5 × 5.6 cm
(6.1" D × 5.3" W × 2.2" H)
Unit Weight 0.5 kg (1.15 lb)
Shipping Weight 0.9 kg (2.00 lb)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
*At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
supply
USRACK 4 RU rack accessory with North American
power supply
FEXTPS Fiber External Power Supply with multiple
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Maximum
Transmission
Distance
Multimode (62.5/125 µm)
FTD4M1ST FRD4M1ST ST 1 1310/1550 nm 16 dB 3 km (1.9 mi)
Single Mode (9/125 µm)
FTD4S1ST FRD4S1ST ST 1 1310/1550 nm 23 dB 69 km (42.9 mi)
FTD4S1FC FRD4S1FC FC 1 1310/1550 nm 23 dB 69 km (42.9 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.