Data Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
DATA/ELECTRICAL
Number of Channels 1
Data Communication RS-232, RS-422, and RS-485 (2-wire/4-wire)
with Tri-State, Manchester, and Bi-Phase
Maximum Baud Rate 250 Kbps
Operating Mode Asynchronous, simplex or full-duplex
Bit Error Rate <1 in 10
-9
at maximum optical loss budget
Power
Surface Mount 8 to 15 VDC at 2 W
Rack Mount Provided by rack
MTBF >100,000 hours
Current Protection Automatic resettable solid-state current
limiters
Circuit Board Meets IPC standard
LED Indicators Power, Data In, Data Out, Link, Loop Back
MECHANICAL
Connectors
Power Terminal block
Optical ST or FC
Data Terminal block
Relay Terminal block
Number of Rack Slots 1
GENERAL
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Dimensions 15.5 × 13.5 × 2.8 cm
(6.1" D × 5.3" W × 1.1" H)
Unit Weight 0.34 kg (0.75 lb)
Shipping Weight 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
*At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
supply
USRACK 4 RU rack accessory with North American
power supply
FEXTPS Fiber External Power Supply with multiple
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Maximum
Transmission
Distance
Multimode (62.5/125 µm)
FTD1M1ST FRD1M1ST ST 1 in, 1 out 1310/1550 nm 16 dB 4 km (2.5 mi)
Single Mode (9/125 µm)
FTD1S1ST FRD1S1ST ST 1 in, 1 out 1310/1550 nm 23 dB 69 km (42.9 mi)
FTD1S1FC FRD1S1FC FC 1 in, 1 out 1310/1550 nm 23 dB 69 km (42.9 mi)
Note: The unit can be used for transmission of RS-232 or RS-422, but not simultaneously.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.