Data Sheet

PRODUCT SPECIFICATION
transmission & power
C3913 / NEW 6-7-12
International Standards
Organization Registered Firm;
ISO 9001 Quality System
FTD1/FRD1 Fiber Transmitter and Receiver
SINGLE-CHANNEL BIDIRECTIONAL DATA
Product Features
• Bidirectional Data Channel That Supports EIA RS-232C/D,
RS-422/RS-485 (2-wire/4-wire) with Tri-State, Manchester, and
Bi-Phase Communication
• Multimode Fiber Support for Distances up to 4 km (2.5 mi)
• Single-Mode Support for Distances up to 69 km (42.9 mi)
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Laser Diode for Transmission of Optical Signals
• Voltage Transient Protection on All Power and Signal
Input/Output Lines
• LED Status Indicators for Monitoring All Critical
Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design
The FTD1/FRD1 fiber transmitter and receiver provide transmission
of bidirectional data over one optical fiber. The FTD1 transmitter and
FRD1 receiver can be used with multimode or single-mode optical
fiber. When using single-mode fiber, the FTD1/FRD1 transmitter and
receiver offer an optical budget of 23 dB and provide a transmission
distance of 69 km.
The FTD1/FRD1 plug-and-play design ensures ease of installation by
requiring no electrical or optical adjustments. Modular in design,
FTD1 and FRD1 units can be rack-mounted using the EURACK/
USRACK chassis, or stand-alone modules can be placed on a desktop
or mounted to a wall (wall mount kit not required).
For stand-alone and wall mount installations, external power is
required for the FTD1/FRD1 units. The units can be powered with
the recommended FEXTPS fiber external power supply.
FTD1M1ST