Installation Manual

C3952M-B (5/14) 15
CONNECTING DATA
CONNECTING ETHERNET OR COAXIAL CABLES
Connect the BNC or RJ-45 connector to the arm component’s pre-wired data connector.
Figure 8. Connecting Ethernet/Coaxial Connections with BNC Connector
The female-to-female adapter (supplied) is required to connect RJ-45 ethernet cables.
Figure 9. Connecting Ethernet/Coaxial Connections with RJ-45 Connector
CONNECTING FIBER CABLE
Insert the supplied fiber optic connector (FSFP module) into the fiber optic media converter.
Figure 10. Connecting the Fiber Optic Media Converter