Installation Manual

C3952M-B (5/14) 13
12. Connect the wiring as outlined in Connecting Power and Data on page 14.
Figure 5. Inserting the Data and Power Cables
MOUNTING TO A POLE/CORNER
EPM ESPRIT POLE MOUNT
1. Attach the mount to the pole with three stainless steel straps (supplied).
2. Route the cables to the unit using one of the following procedures:
• Through rear opening: Refer to Routing the Cables Through the Rear of the Mount Arm on page 10.
• Through conduit holes: Refer to Routing the Cables Through the Conduit Holes in the Mount Arm on page 12.
ECM100 ESPRIT CORNER MOUNT
1. Mark the fastener positions on the mounting surface using the EMC100 mount as a template.
2. Route the cables to the unit using one of the following procedures:
• Through rear opening: Refer to Routing the Cables Through the Rear of the Mount Arm on page 10.
• Through conduit holes: Refer to Routing the Cables Through the Conduit Holes in the Mount Arm on page 12.