Spec Sheet

TECHNICAL SPECIFICATIONS
RECOMMENDED POWER SUPPLIES AND HARDWARE
9 VDC POWER SUPPLY PRODUCT FEATURES
USRACK/EURACK RACK CHASSIS
• Output Voltage: 9 VDC
• Output Current: 6.5 A
• Input Voltage: 90 to 264 VAC
• Provides Fourteen 1-Inch Slots
• Rack Mount and Power for 14 Modules
• Automatic Current Limiting at Each Module Slot
(Not at the Power Supply Output)
• Voltage Transient Protection on all Power and Signal Input/Output Lines
Provides Unconditional Protection
• All Modules Installed in the Chassis are Hot-Swappable
•3 RU High
• IEC Cord Included: US, UK, EU, or AUS
• Optional RACK1B Single-Width Blank Filler Panel Covers the Front of an
Empty Chassis Slot
FEXTPS
• Output Voltage: 9 VDC
• Output Current: 2 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
12 VDC POWER SUPPLY PRODUCT FEATURES
ECPS-12VDC-0.5A
• Output Voltage: 12 VDC
• Output Current: 0.5 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
ECPS-12VDC-3A
• Output Voltage: 12 VDC
• Output Current: 3 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
48 VDC POWER SUPPLY PRODUCT FEATURES
FEXTPS-48V
• Output Voltage: 48 VDC
• Output Current: 1.36 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for US and EU Application
• For Use on Standalone PoE Models
• IEC Cord Included: US, UK, EU, or AUS
ECPS-48VDC-5A
• Output Voltage: 48 VDC
• Output Current: 5 A
• AC Input Voltage: 85 to 264 VAC, 47 to 63 Hz
• DC Input Voltage: 120 to 375 VDC
• Output Overvoltage Protection: <57 VDC
• Output Overcurrent Protection: >150% of Rated Load Current
• Output Short Circuit Protection: Hiccup Mode, Non-Latching
(Auto-Recovery When the Fault is Removed)
• Power Factor: >0.96 at 115 VAC, >90 at 230 VAC
• High Operating Efficiency: >90% at 115 VAC, >92% at 230 VAC
• Small Package for Limited Space Installations
• Mounts on 35 mm (1.4 in) DIN Rail in Accordance with EN60715
• Natural Convection Cooling: No Fans Required
ECPS-48VDC-10A
• Output Voltage: 48 VDC
• Output Current: 10 A
• AC Input Voltage: 85 to 264 VAC, 47 to 63 Hz
• DC Input Voltage: 120 to 375 VDC
• Output Overvoltage Protection: <57 VDC
• Output Overcurrent Protection: >150% of Rated Load Current
• Output Short Circuit Protection: Hiccup Mode, Non-Latching
(Auto-Recovery When the Fault is Removed)
• Power Factor: >0.96 at 115 VAC, >90 at 230 VAC
• High Operating Efficiency: >91% at 115 VAC, >93% at 230 VAC
• Small Package for Limited Space Installations
• Mounts on 35 mm (1.4 in) DIN Rail in Accordance with EN60715
• Natural Convection Cooling: No Fans Required