Installation Manual
Table Of Contents
- Important Safety Instructions
- Troubleshooting Tips
- Regulatory Notices
- 1. Introduction
- 2. Installation
- 2.1(A) Inserting Screw Anchors
- 2.2(A) Connecting the Wiring
- 2.3(A) Mounting the Camera
- 2.4(A) Adjusting the Camera Position
- 2.5(A) Locking (fixing) the Camera Body
- 2.1(B) Disassembling the Camera
- 2.2(B) Connecting the Wiring
- 2.3(B) Mounting the Camera
- 2.4(B) Adjusting the Camera Position
- 2.5(B) Adjusting the Lens (if equipped with varifocal lens)
- 2.6(B) Completing the Installation
- 3. Specifications
- PRODUCT WARRANTY AND RETURN INFORMATION
Introduction
INTRODUCTIO
6
C3909M-EN (03/12)
1. Introduction
The dome camera series are ideal for indoor installation in commercial environment. With 2 or 3-axis
mount support, it provides flexible installation: 2 axis mounts on ceilings only and 3 axis mounts on a
ceiling or wall even at an angle.
1.1 Package Contents
Check that the items received match those listed on the order form and packing slip. The dome camera
series packing box includes:
• One fully assembled camera
• One Installation manual
• Two screw anchors
• Two TP4x15mm tapping screws
• One guide pattern (FD1-IR series only)
• One TP1.7x3mm tapping screw (FD1-F series only)
If any parts are missing or damaged, contact the dealer you purchased the camera from.
1.2 Dimensions
Figure 1-1 FD1-F3-4(X)/FD1-F4-4(X)