Spec Sheet

C238 / REVISED 1-06
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
camera solutions
Esprit
®
Series Mounts
CORNER, PEDESTAL, POLE, AND WALL
Product Features
• Low Cost
• For Use with Esprit
®
Series Integrated Positioning Systems in Corner,
Pedestal, Pole, and Wall Applications
• Can Also Be Used in Parapet Applications When Used with
Appropriate Mount Adapter
• Constructed of Aluminum
• Features Cable Feedthrough
• Easy to Install
• For Indoor or Outdoor Applications
The Esprit
®
Series mounts include the EWM wall mount, EPM pole
mount, ECM100 corner mount, EPP pedestal adapter, and the EA4348
EWM-to-Legacy
®
adapter.
All mounts are aluminum and feature a feedthrough opening to conceal
electrical cables. They have a gray, polyester powder coat finish.
The EWM wall mount is the essential component in this series. It can
be used as a stand-alone mount for wall applications or in conjunction
with the EPM pole mount, ECM100 corner mount, or PP100 parapet
mount. When used with the EA4348 adapter, the EWM can also be
mounted to a Legacy PP300L, PP301L, or PP4348 parapet mount.
The EWM wall mount is easy to install and requires no special tools.
The Esprit integrated positioning system attaches directly to the EWM
with three stainless-steel screws and washers. The mount can be
attached to any vertical load-bearing surface with four fasteners
suitable for the mounting surface (not supplied). Stainless-steel nuts
and washers are supplied for attaching the EWM to the mounting studs
on the pole, corner, and parapet mounts.
The EPP pedestal adapter is designed to adapt an Esprit integrated
positioning system to pedestal mounts, such as the PM2000 or
PM2010. Three stainless-steel nuts and washers are provided to
secure the Esprit system to the adapter.
The EA4348 EWM-to-Legacy adapter can also be used to retrofit
corner-, pole-, and parapet-mounted Legacy systems with Esprit
integrated positioning systems. The EA4348 will make any CM400,
PA402, PP400, PP300L/PP301L, and PP4348 Legacy mount compatible
with the EWM wall mount.
ESPRIT SYSTEM MOUNTED ON EWM WALL MOUNT
WITH EPM POLE ADAPTER
EWM WALL MOUNT
EPM POLE ADAPTER
EPP PEDESTAL ADAPTER
EA4348 LEGACY
ADAPTER
ECM100 CORNER ADAPTER