Endura® License Manager Installation Video Security System C3610M-A (1/08)
Contents Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Endura License Manager Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing Behaviors on the Endura System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assigning or Removing a Behavior . . . . . . . .
Description The Endura® system supports intelligent video analysis through object and activity behaviors that are installed on NET5301T-I intelligent video encoders. Use the Endura License Manager to install and manage behaviors. This application can be installed on any computer that is connected to the Endura system. The following behaviors may be installed on intelligent encoders: • Abandoned Object Behavior: Detects objects that are left in a defined area for too long and then triggers an alarm.
Endura License Manager Installation 1. Place the installation CD into the CD or DVD drive of your computer. The InstallShield Wizard starts to run, and guides you through the installation process. The Endura License Manager Welcome screen appears. Figure 1. Installation Welcome Screen 2. Click Next. The Pelco End-User Software License Agreement screen appears. Figure 2. Pelco End-User Software License Agreement 3. Review the license agreement, and then click Next. 4.
Installing Behaviors on the Endura System An activation key is required to install a behavior on the Endura System Manager. Activation keys are available at the Pelco Web site at the following URL: www.pelco.com/activate. An activation key is unique, and cannot be used on any other Endura system. The registration number and activation key will be emailed to you. Print and keep this information for your records. 1.
4. The License Activation, Step 1 of 3 screen appears. Figure 5. License Activation Step 1 5. Enter the first seven digits of the registration number for the intelligent encoder behavior twice, and then click Next. The License Activation, Step 2 of 3 screen appears. Figure 6.
6. Enter the activation key for the behavior, and then click Next. The License Activation, Step 3 of 3 screen appears. Figure 7. License Activation Step 3 7. Click Finish to manage the installed behaviors. Refer to Assigning or Removing a Behavior on page 8 for more information. 8. Click Continue to repeat these steps for additional behaviors. An activation key indicates the number of licenses that were purchased for the behavior. You do not need to repeat these steps for each seat in a multiseat license.
Assigning or Removing a Behavior After a behavior is installed on the Endura system, it must be assigned to an intelligent encoder. Behaviors may be assigned to or removed from intelligent encoders as often as necessary. The number of intelligent encoders to which a behavior may be assigned cannot exceed the number of licenses that were purchased for that behavior. Figure 8. Select Manage to Assign Behaviors 1. Start the Endura License Manager, and then click the Manage button.
a behavior to a camera as long as there is at least one license available. To assign a behavior to additional cameras, you must remove a license from an existing camera. The Endura system manager tracks the number of licenses for each behavior. You cannot assign a behavior to a camera if there are no remaining licenses. 2. Assign the behaviors as follows: a. Select a behavior and a camera. If necessary, expand the list of cameras under each encoder before you assign a behavior to a camera. b.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • • • • • • • • • • • • • • Five years on fiber optic products and TW3000 Series unshielded twisted pair (UTP) transmission products. Three years on Spectra® IV products. Three years on Genex® Series products (multiplexers, server, and keyboard).
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.
