Data Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community
TECHNICAL SPECIFICATIONS
MODEL
ENC5516 16-channel, H.264, direct-attached video
encoder; requires ENC5400-4PORT Capture
card (sold separately)
Notice:
The ENC5516 must be on a separate
DSSRV than the ENC5416.
SUPPLIED ACCESSORIES
Power Adapter 12 V through auto-ranging DC (12 V, 6 A);
allows for redundant power
Power Cord Based on country designation
Note: Units shipped to China do not include
power cords
Terminal Block 3, 5-pin terminal blocks
4, 10-pin terminal blocks
Rack Mount 2, mounting brackets
Rubber Feet 4 (for desktop)
VIDEO/AUDIO
Video Standards NTSC/PAL
Video Encoding H.264, Main profile
Video Resolutions
Analog Cameras NTSC PAL
D1 720 x 480 720 x 576
2CIF 720 x 240 720 x 288
CIF 352 x 240 352 x 288
Video Output 2 BNC connectors (1 for MUX and 1 for spot
monitor); 16 BNC looping video output
Audio Input 16 channels
Audio Format Pulse code modulation (PCM)
Sampling Resolution 8- or 16-bit
Sampling Frequency 4, 8, 16, or 32 kHz
PTZ CONTROL
Interface 2; RS-422, RS-485, video in
Protocol Pelco P, Pelco C, and Pelco D
ALARMS/RELAYS
Alarms In 16
Relays Out 4
POWER
Power Consumption
Input Voltage 12 VDC (through supplied auto-ranging
90 to 240 VAC power adapter)
Current 2130 mA
Power 25.56 W (maximum ±5%)
FRONT PANEL INDICATORS
PWR1 Green when the power source is connected
PWR2 Green when the power source is connected
LINK Green when the host is turned on and a
connection is made between the encoder and
the host
INFO Blinks green when the firmware is updating
Video Input (1 to 16 Channels) Green when detecting an active video signal
on the corresponding video input connector
ENVIRONMENTAL
Operating Temperature 0° to 60°C (32° to 140°F)
Operating Humidity 85% maximum relative humidity,
noncondensing
PHYSICAL
Dimensions 18.9 x 44.2 x 4.4 cm
(7.5" D x 17.4" W x 1.7" H)
Unit Weight 2.7 kg (6 lb)
Shipping Weight 5.4 kg (12 lb)
CERTIFICATIONS/RATINGS
• CE, Class A; meets EN50130-4 standard requirements
• FCC, Class A
• UL/cUL Listed
• CCC*
• KCC*
• TUV
*As of the date of this publication, these certifications are pending.
Please consult the factory, our Web site www.pelco.com, or the most
recent B.O.S.S
®
update for the current status of certifications.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2014, Pelco, Inc. All rights reserved.
Notice: Judgment as to the suitability of the products for users’ purposes is solely the
users’ responsibility. Users should refer to the Operation manuals for cautionary
statements regarding user selected options and how they might affect video quality.
Users shall determine the suitability of the products for their own intended application,
picture rate and picture quality. In the event users intend to use the video for evidentiary
purposes in a judicial proceeding or otherwise, users should consult with their attorney
regarding any particular requirements for such use.