Spec Sheet

PRODUCT SPECIFICATION
video management solutions
C4000 / NEW 6-2-14
International Standards
Organization Registered Firm;
ISO 9001 Quality System
ENC5516 H.264 Direct-Attached Video Encoder
16 ANALOG CHANNELS, D1 AT 30/25 IPS
Product Features
• Direct-Attached Video Support for Digital Sentry
®
Network Video
Recorder
• Supports 16 Channels per Encoder
• Provides 16 Looping, Auto-Terminating Video Outputs
• H.264 Hardware Compression
• Up to 30/25 (NTSC/PAL) ips at CIF, 2CIF, and D1 per Input
• Frame Rates and Resolutions Configurable per Channel
• 16 Audio Inputs, 16 Alarm Inputs, and 4 Relay Outputs
Digital Sentry
®
ENC5516 video encoder is purpose-built to provide
direct-attached support for analog cameras on the high-performance
Digital Sentry network video recorder (NVR) platform, and provides
unique and affordable support for IP migration. The ENC5516 is a
convenient replacement for existing DVRs and lets customers
leverage their existing analog wiring infrastructure.
Existing analog infrastructure means existing analog wiring
structures must be supported. Use the ENC5516 for capturing the
BNC connections from other recording systems. Directly attach up to
four ENC5516s through supplied cables to one DSSRV to
accommodate up to 64 analog cameras.
Add the ENC5516 to your DSSRV for an integrated, high-performance
IP migration platform.
IMPORTANT NOTE. PLEASE READ. The network implementation is shown as a
general representation only and is not intended to show a detailed network topology.
Your actual network will differ, requiring changes or perhaps additional network
equipment to accommodate the system as illustrated. Please contact your local Pelco
representative to discuss your specific requirements.
DSSRV
ENC5516