MAINTENANCE/ SERVICE EH2500 Series Dust-Tight Enclosure C1473SM-C (4/07)
C1473SM-C (4/07)
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Models . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Illustrations 1 2 EH2500 Series Exploded Assembly Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 EH2500 Series Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 List of Tables A B 4 EH2500 Series Exploded Assembly Parts List . . . . . . . . . . .
Important Safety Instructions 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture. 3. Only use replacement parts recommended by Pelco. 4.
Description The EH2500 Series enclosures are sealed, dust-tight and waterproof camera enclosures designed to protect a CCTV camera and lens from adverse environmental conditions. The enclosures feature a sled for camera mounting and a “T” handle on the rear plate to assist in removing the back plate during installation and servicing. All models will accept CCD cameras with fixed focal length or motorized zoom lenses. MODELS EH2508 EH2508-1/-2/-3 EH2512 EH2512-1/-2/-3 EH2515 EH2515-1/-2/-3 6.25" L x 2.
Exploded Assembly Diagrams 17 18 19 26 25 24 23 20 22 21 4 5 12 1 9 10 6 3 11 2 15 16 7 8 13 Figure 1.
Table A. EH2500 Series Exploded Assembly Parts List Item 1 Description Camera sled, EH2508 Camera sled, EH2512 Camera sled, EH2515 2 T-handle 3 Terminal bracket* 4 Rear plate 5 Liquid-tight fitting 6 Thermostat* 7 Self-sealing fastener, 10-24 x 0.
INPUT POWER ENCLOSURE { TERMINAL 4 (AC LOW) TERMINAL 3 (AC HIGH) INPUT POWER CAMERA { TERMINAL 2 9 TERMINAL 1 12 4 PIN 1 7 PIN 2 PIN 3 11 PIN 1 RED WIRE (NEUTRAL) PIN 2 BLACK WIRE PIN 3 WHITE WIRE { HEATING ELEMENT POWER 13 6 5 2 PIN 2 PIN 1 1 4 3 CAMERA POWER { PIN 1 PIN 2 Figure 2. EH2500 Series Wiring Diagram Table B.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission products. • Three years on Spectra® IV products. • Three years on Genex® Series products (multiplexers, server, and keyboard).
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.
