Spec Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community
TECHNICAL SPECIFICATIONS
MODELS
C20-CH-6 1/3-inch CCD high resolution color box
camera, 18 to 32 VAC or 12 VDC, NTSC format
(Revision A)
C20-CH-6X 1/3-inch CCD high resolution color box
camera, 18 to 32 VAC or 12 VDC, PAL format
(Revision A)
C20-CH-7X 1/3-inch CCD high resolution color box
camera, 220 VAC, PAL format
GENERAL
Imaging Device Sony
®
1/3-inch EXview HAD CCD II
™
960H
Signal Processing Sony new digital signal processor, Effio-E
™
Picture Elements
NTSC 976 (H) x 494 (V), approx. 480k
PAL 976 (H) x 582 (V), approx. 570k
Sensing Area 4.7 x 3.5 mm (3/16 x 1/8-inch)
Scanning System
NTSC 525 lines, 2:1 interlace
PAL 625 lines, 2:1 interlace
Synchronization System Internal
Horizontal Resolution 650 TV lines
Auto Iris Lens Type DC drive
Sensitivity 0.25 lux, f/1.2, 30 IRE
Electronic Day/Night Switch
Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment)
Automatic Gain Control On/off 35 dB
Backlight Compensation Yes
White Balance ATW/push lock/manual/anti-CR/user2/
user/push
Color Correction With white balance
Gamma Selectable (ATR)
Video Output 1 Vp-p, 75 ohms
Auto White Balance Range 2,500° to 9,500°K
Noise Reduction (DNR) 2D
Privacy Zones Yes
Motion Detection Yes
Camera Titles Yes
ELECTRICAL
Power Requirement*
C20-CH-6 18 to 32 VAC 60 Hz/12 VDC +10% to –15%
(Revision A)
C20-CH-6X 18 to 32 VAC 50 Hz/12 VDC +10% to –15%
(Revision A)
C20-CH-7X 220 VAC +10% to –15%, 50 Hz
Power Consumption
C20-CH-6/C20-CH-6X 3.5 W
C20-CH-7X 4 W
Power Connector 2-pin terminal block with push lock, or line
cord on 220 VAC models
Video Connector BNC
Auto Iris Connector 4-pin connector (miniature square)
*Suggested installations (Revision A):
For outdoor environmental conditions from –30° to 50°C (–22° to 122°F),
use only an AC power supply source (18 to 32 VAC).
For indoor or outdoor applications with ambient temperatures of 0° to 50°C
(32° to 122°F), use 12 VDC power, or an AC power supply source
(18 to 32 VAC).
MECHANICAL
Lens Mount CS mount
Camera Mount 1/4-inch UNC-20 screw, top or bottom of
camera housing
ENVIRONMENTAL
Operating Temperature –10° to 50°C (14° to 122°F)
Storage Temperature –20° to 60°C (–4° to 140°F)
Operating Humidity 20% to 90%, noncondensing
Storage Humidity 20% to 90%, noncondensing
PHYSICAL
Dimensions (includes BNC) 108 x 60 x 55 mm
(4.25" L x 2.36" W x 2.17" H)
Weight (without lens)
C20-CH-6/C20-CH-6X 0.30 kg (0.66 lb)
C20-CH-7X 0.45 kg (0.99 lb)
Shipping Weight
C20-CH-6/C20-CH-6X 0.55 kg (1.21 lb)
C20-CH-7X 0.60 kg (1.32 lb)
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
RECOMMENDED MOUNTS
C10-UM C10 series universal wall/ceiling/rail
mount kit
RECOMMENDED POWER SUPPLIES
TF2000 Power supply for one camera, 20 VA
MCS Series Multiple camera power supply, indoor
WCS Series Single/multiple camera power supply,
outdoor
RECOMMENDED LENSES
13VA, 13VD Series Varifocal lenses, 1/3-inch format;
13VA (manual iris); 13VD (auto iris, DD)
13ZD Series Motorized zoom lenses, 1/3-inch format
(auto iris, DD)
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2014, Pelco, Inc. All rights reserved.