User's Manual

Instruments
79
To auto reset the trip meters:
• Press the SCROLL button to select
AUTO RESET, then press the
SELECT button.
• Press the SCROLL button to select
OFF, 1HR, 2HRS, 4HRS or 8HRS.
• Press the SELECT button to confirm
the selection and return to the
TRIP SETUP menu.
• After the ignition has been
switched OFF and the set time has
elapsed, all items within TRIP2 will
be reset to zero.
Bike Setup
From the SETTINGS menu, select BIKE
SET UP to configure the Anti-Lock
Braking System (ABS) and Traction
Control (TC) settings.
BIKE SETUP
EXIT
ABS
TC
BIKE SETUP Menu
The following menu items are available
for selection:
• EXIT
• ABS
• TC.
Exit
Select EXIT to return to the SETTINGS
menu.
Anti-Lock Braking System (ABS)
It is possible to temporarily disable the
ABS system. The ABS system cannot be
permanently disabled, it will be
automatically enabled when the ignition
is turned OFF and then ON again.
Warning
Selecting ABS DISABLE will disable the
anti-lock braking system.
The ABS settings stored for each
riding mode will be overridden,
regardless of whether they are set to
Road, Off-Road or OFF.
The ABS and the riding mode ABS
settings will not be enabled again until
ENABLE is selected from the ABS menu
or the ignition is turned OFF then ON
again.
If the ABS is disabled, the brake system
will function as a non-ABS braking
system. In this situation braking too
hard will cause the wheels to lock, and
may result in loss of motorcycle
control and an accident.
Warning
Do not attempt to adjust the ABS
settings while the motorcycle is in
motion as this may lead to loss of
motorcycle control and an accident.