User's Manual

Instruments
42
Note:
• If the riding modes link is disabled,
changes made to the TSAS damping
settings will remain active until
further adjustment takes place,
regardless of riding mode selection.
• If the riding modes link is enabled,
any adjustments made to the TSAS
damping settings will be saved to
the currently active riding mode.
The new TSAS settings will be
automatically recalled whenever
the riding mode is reselected. The
riding mode’s previous TSAS
settings will be overwritten.
• If the riding modes link is enabled
and a new riding mode is selected,
the new riding mode’s TSAS
settings will automatically become
active.
• TSAS has nine damping settings
ranging from COMFORT (soft) to
SPORT (firm).
• Press and release the joystick
centre allows individual selection of
each of the nine settings.
• Press and hold the joystick control
allows direct selection of the preset
COMFORT, NORMAL and SPORT
settings.
• There is a short time-out period to
allow for further scrolling to take
place. After the time-out period has
elapsed, the selected damping
setting will be automatically
activated and the display will
return to the home screen.
Alternatively, press the joystick
centre to confirm the setting and
return to the home screen.
For more information on Triumph Semi
Active Suspension (TSAS), see
page 110
.
Screen Contrast
The Screen Contrast information tray
item allows the display screen contrast
to be adjusted.
HIGH CONTRAST
AUTO CONTRAST
Screen Contrast Information Tray
There are two options available:
• HIGH CONTRAST - This option locks
the display screen to the white
background version of each display
screen style for maximum visibility.
• AUTO CONTRAST - This option uses
the instrument light sensor to
adjust the contrast to the most
suitable setting. In bright sunlight,
low brightness settings will be
overridden to make sure that the
instruments can be viewed at all
times.
To select an option:
• Push the joystick down/up to select
either the HIGH CONTRAST or AUTO
CONTRAST option and press the
joystick centre to confirm.
If the rider defined brightness setting is
suitable this will be used, see
page 54
.
Note:
• Do not cover the light sensor on the
display screen as this will stop the
screen contrast from working
correctly.