User's Manual

Instruments
36
Warning
After selecting a riding mode, operate
the motorcycle in an area free from
traffic to gain familiarity with the new
settings.
Do not loan your motorcycle to anyone
as they may change the riding mode
settings from the one you are familiar
with, causing loss of motorcycle
control and an accident.
Note:
• The riding mode will default to
ROAD when the ignition is switched
ON, if the OFF-ROAD or RIDER mode
was active the last time the ignition
was switched OFF with ABS or TC
set to OFF-ROAD or OFF in either of
those modes.
• Otherwise, the last selected riding
mode will be remembered and
activated when the ignition is
switched ON.
• If the mode icons are not visible
when the ignition switch is in the
ON position, make sure that the
engine stop switch is in the RUN
position.
Note:
• If the battery is disconnected, then
the RIDER mode settings will
default back to the original factory
settings.
The current riding mode is shown in the
upper left of the display screen.
To select a riding mode:
• Press and release the MODE button
on the left hand switch housing to
activate the riding mode selection
tray at the bottom of the display
screen.
• The currently active riding mode
icon is highlighted with a blue
background.
To change the selected riding mode:
• Either push the joystick left or
right, or repeatedly press the MODE
button until the required mode is in
the centre of the display screen,
highlighted with an arrow above it.
• A brief press of the joystick centre
will select the required riding mode,
and the icon in the upper left of the
display screen will change.
o7:29
12.5
8
6
N
4
2
0
12
14
1
F
E
2 3 4 5 6
PM
RPM
x1000
mph
m
10
3
2
2
1
1. MODE button
2. Current riding mode
3. New riding mode