User's Manual

Instruments
33
Service Interval Announcement
The service interval
announcement shows the total distance
or time that the motorcycle has
remaining before a service is required.
When the remaining distance is 0 miles
(0 km), or the remaining time is 0 days,
the service symbol will remain on until
the service has been carried out and
the system has been reset by your
authorised Triumph dealer.
If the service is overdue then OVERDUE
will be shown and the service symbol
will be shown in the information tray.
When the service has been carried out
by your authorised Triumph dealer, the
system will be reset.
The distance to the next service or
OVERDUE message will also be shown
on the instrument start up screen when
the ignition is turned on.
The service symbol will also be shown if
a fault has occurred and the ABS and/
or MIL warning lights are illuminated.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Ambient Air Temperature
The ambient air temperature is
displayed as either
o
C or
o
F.
When the motorcycle is stationary the
heat of the engine may affect the
accuracy of the ambient temperature
display.
Once the motorcycle starts moving the
display will return to normal after a
short time.
To change the temperature from °C or
°F see
page 55
.
Frost Symbol
The frost symbol will illuminate
if the ambient air temperature is 4°C
(39°F) or lower.
The frost symbol will remain illuminated
until the temperature rises to 6°C (42°F).
An alert will also be displayed in the
information tray.
ACKNOWLEDGE
CAUTION: LOW AIR TEMPERATURE
RISK OF SURFACE ICE
1/3 warnings