User's Manual
Table Of Contents
- Table of Contents
- 1 Foreword
- 2 Safety First
- 3 Warning Labels
- 4 Parts Identification
- 5 Serial Numbers
- 6 Instruments
- 6.1 Instrument Displays Overview
- 6.2 Thin Film Transistor (TFT) Instrument Display
- 6.2.1 Instrument Panel Layout
- 6.2.2 TFT Display Navigation
- 6.2.3 TFT Themes and Styles
- 6.2.4 Warning Lights
- 6.2.4.1 Engine Management System Malfunction Indicator Light (MIL)
- 6.2.4.2 Low Oil Pressure Warning Light
- 6.2.4.3 Immobiliser/Alarm Indicator Light
- 6.2.4.4 ABS (Anti-Lock Brake System) Warning Light
- 6.2.4.5 Traction Control (TC) Indicator Light
- 6.2.4.6 Traction Control (TC) Disabled Warning Light
- 6.2.4.7 Cruise Control Light
- 6.2.4.8 Triumph Semi Active Suspension (TSAS) Warning Light
- 6.2.4.9 Direction Indicators
- 6.2.4.10 Hazard Warning Lights
- 6.2.4.11 High Beam Button
- 6.2.4.12 Daytime Running Lights (DRL)
- 6.2.4.13 Low Fuel Warning Light
- 6.2.4.14 Tyre Pressure Monitoring System (TPMS) Warning Light (if fitted)
- 6.2.5 Speedometer and Odometer
- 6.2.6 Tachometer
- 6.2.7 Gear Position Display
- 6.2.8 Fuel Gauge
- 6.2.9 Service Interval Announcement
- 6.2.10 Ambient Air Temperature
- 6.2.11 Riding Modes
- 6.2.12 Riding Mode Selection
- 6.2.13 Information Tray
- 6.2.13.1 Warnings
- 6.2.13.2 Trip Meter
- 6.2.13.3 Fuel Status Information
- 6.2.13.4 Tyre Pressure Monitoring System (TPMS) (if fitted)
- 6.2.13.5 Odometer
- 6.2.13.6 Service Interval Announcement
- 6.2.13.7 Triumph Semi Active Suspension (TSAS)
- 6.2.13.8 Screen Contrast
- 6.2.13.9 Style Options
- 6.2.13.10 Coolant Temperature
- 6.2.13.11 Windscreen Adjustment
- 6.2.14 Main Menu
- 6.2.15 Instrument Panel Position Adjustment
- 6.3 Liquid Crystal Display (LCD) Instrument Display
- 6.3.1 Instrument Panel Layout
- 6.3.2 Warning Lights
- 6.3.2.1 Engine Management System Malfunction Indicator Light (MIL)
- 6.3.2.2 Low Oil Pressure Warning Light
- 6.3.2.3 High Coolant Temperature Warning Light
- 6.3.2.4 Immobiliser/Alarm Indicator Light
- 6.3.2.5 ABS (Anti-Lock Brake System) Warning Light
- 6.3.2.6 Traction Control (TC) Indicator Light
- 6.3.2.7 Traction Control (TC) Disabled Warning Light
- 6.3.2.8 Cruise Control Light
- 6.3.2.9 Direction Indicators
- 6.3.2.10 High Beam Switch
- 6.3.2.11 Fog Lights (if fitted)
- 6.3.2.12 Low Fuel Warning Light
- 6.3.2.13 Neutral
- 6.3.2.14 Battery Warning Light
- 6.3.2.15 Tyre Pressure Warning Light (if TPMS is fitted)
- 6.3.2.16 Frost Warning Light
- 6.3.3 Warning and Information Messages
- 6.3.4 Tachometer
- 6.3.5 Motorcycle Status Display Screen
- 6.3.6 Multifunction Display Screen
- 6.3.7 Settings Menu
- 6.3.8 Riding Modes
- 7 General Information
- 7.1 Hand Controls
- 7.1.1 Keyless Ignition (if fitted)
- 7.1.2 Master Ignition Switch (if fitted)
- 7.1.3 Ignition Key
- 7.1.4 Ignition Switch/Steering Lock
- 7.1.5 Right Handlebar Switches
- 7.1.6 Right Handlebar Switches
- 7.1.7 Left Handlebar Switches
- 7.1.7.1 Cruise Control Adjust Button
- 7.1.7.2 Daytime Running Lights (DRL) Switch (if fitted)
- 7.1.7.3 MODE Button
- 7.1.7.4 Direction Indicator Switch
- 7.1.7.5 Joystick Button
- 7.1.7.6 Horn Button
- 7.1.7.7 Heated Grips Switch
- 7.1.7.8 Fog Lights Switch (if fitted)
- 7.1.7.9 High Beam Button
- 7.1.7.10 Rider’s Heated Seat Switch (if fitted)
- 7.1.8 Left Handlebar Switches
- 7.1.9 Throttle Control
- 7.1.10 Brake and Clutch Lever Adjusters
- 7.2 Cruise Control
- 7.3 Triumph Semi Active Suspension (TSAS) (if fitted)
- 7.4 Traction Control (TC)
- 7.5 Tyre Pressure Monitoring System (TPMS) (if fitted)
- 7.6 Fuel
- 7.7 Windscreen
- 7.8 Handlebar Adjustment
- 7.9 Stands
- 7.10 Seats
- 7.11 Helmet Hook
- 7.12 Tool Kit, Handbook and the Triumph Accessory D-Lock
- 7.13 Electrical Accessory Sockets
- 7.14 Universal Serial Bus (USB) Socket
- 7.15 Expedition Aluminium Panniers (if fitted)
- 7.16 Running-In
- 7.17 Daily Safety Checks
- 7.1 Hand Controls
- 8 How to Ride the Motorcycle
- 9 Accessories, Loading and Passengers
- 10 Maintenance
- 10.1 Scheduled Maintenance
- 10.2 Scheduled Maintenance Table
- 10.3 Engine Oil
- 10.4 Cooling System
- 10.5 Throttle Control
- 10.6 Clutch
- 10.7 Final Drive Unit
- 10.8 Brakes
- 10.9 Steering/Wheel Bearings
- 10.10 Front Suspension
- 10.11 Rear Suspension
- 10.12 Tyres
- 10.13 Battery
- 10.14 Fuse Boxes
- 10.15 Chassis Electronic Control Module (Chassis ECM)
- 10.16 Headlights
- 10.17 Bulb Replacement
- 11 Cleaning and Storage
- 11.1 Preparation for Washing
- 11.2 Where to be Careful
- 11.3 Washing
- 11.4 After Washing
- 11.5 Care of Matt Paintwork
- 11.6 Care of Gloss Paintwork
- 11.7 Aluminium Items - not Lacquered or Painted
- 11.8 Cleaning of Chrome and Stainless Steel Items
- 11.9 Black Chrome
- 11.10 Cleaning of the Exhaust System
- 11.11 Seat Care
- 11.12 Windscreen Cleaning (if fitted)
- 11.13 Care of Leather Products
- 11.14 Preparation for Storage
- 11.15 Preparation after Storage
- 12 Specifications
- Index
Maintenance
212
Bulb Replacement
Caution
The use of non-approved bulbs may
result in damage to lenses and other
lighting unit components.
In addition, the use of bulbs of
incorrect wattage may cause the
chassis ECM to cut power to affected
lighting circuits.
Use genuine Triumph supplied bulbs as
specified in the Triumph Parts
Catalogue.
Always have replacement bulbs
installed by an authorised Triumph
dealer.
Headlights
All Models except Tiger 1200 XR
The headlight unit is a sealed,
maintenance-free LED unit.
Tiger 1200 XR Only
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulb to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty,
clean with alcohol before reuse.
The headlight unit does not need to be
removed to replace a bulb.
1
2
cgjn
3
1. Bulb retainer (right hand shown)
2. Bulb retainer hook
3. Bulb
To replace a bulb:
• Remove the rider's seat.
• Disconnect the battery, negative
(black) lead first.
• Remove the bulb cover from the
bulb to be replaced by rotating it
anticlockwise.
• Disconnect the multiplug from the
bulb.
• Detach the bulb retainer from the
hook on the headlight assembly
and rotate it away from the bulb as
shown.
• Remove the bulb from the bulb
retainer.
Installation is the reverse of the removal
procedure.