User's Manual

Maintenance
187
To adjust the front brake fluid level:
• Release the reservoir cover screws,
then remove the reservoir cover
noting the position of the
diaphragm seal.
• Fill the reservoir to the upper level
line using new DOT 4 fluid from a
sealed container.
• Refit the reservoir cover making
sure that the diaphragm seal is
correctly positioned between the
reservoir cover and reservoir body.
• Tighten the reservoir cover screws
to 1.5Nm.
Rear Brake Fluid Inspection and
Adjustment
Warning
If there has been an appreciable drop
in the level of the brake fluid in either
brake fluid reservoir, consult your
authorised Triumph dealer for advice
before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause reduced brake
performance potentially leading to loss
of motorcycle control and an accident.
chgp_3
2
1
3
1. Rear brake fluid reservoir
2. Upper level line
3. Lower level line
To inspect the rear brake fluid level:
• The reservoir is visible from the
right hand side of the motorcycle,
through a viewing window in the
rider’s heel guard.