User's Manual

How To Ride The Motorcycle
158
When all of the above conditions are
met, squeeze the front brake lever
firmly and quickly, then release. Upon
releasing the lever, the message HILL
HOLD ACTIVATED will appear in the
multifunction display.
The hill hold control system is now
active and the rear brake will be
automatically applied.
The message HILL HOLD ACTIVATED will
remain visible in the multifunction
display until hill hold control is
deactivated.
The rear brake will remain applied until:
• The system detects that the rider
is attempting to move off.
• Hill hold control is manually
deactivated by the rider.
Deactivation
The hill hold control system will
automatically deactivate when it detects
that the rider is attempting to move off.
The system will progressively release
the rear brake to assist the rider in
moving off.
The hill hold control system can also be
manually deactivated by a second firm
squeeze of the front brake lever.
The message HILL HOLD DEACTIVATED
will be displayed briefly in the
multifunction display.
Hill Hold Unavailable Message
If when attempting to activate the hill
hold control system, the message HILL
HOLD UNAVAILABLE - CHECK MANUAL is
displayed, this indicates one or more of
the following:
• The activation conditions described
on
page 157
have not been met.
• There is a fault with the ABS or
engine management systems and
the ABS and/or MIL warning lights
are illuminated. See Warning Lights
on
page 61
.
The hill hold control system can be
enabled or disabled (see Bike Setup on
page 49
).