User's Manual

General Information
107
Cruise Control
Warning
Cruise control must only be used
where you can drive safely at a steady
speed.
Cruise control should not be used
when riding in heavy traffic, on roads
with sharp/blind bends or when they
are slippery.
Using cruise control in heavy traffic, on
roads with sharp/blind bends or when
they are slippery, may result in loss of
motorcycle control and an accident.
Warning
This Triumph motorcycle should be
operated within the legal speed limits
for the particular road travelled.
Operating a motorcycle at high speeds
can be potentially dangerous since the
time available to react to given traffic
situations is greatly reduced as speed
increases. Always reduce speed in
consideration of weather and traffic
conditions.
Warning
Only operate this Triumph motorcycle
at high speed in closed-course, on-
road competition or on closed-course
racetracks. High speed operation
should only then be attempted by
riders who have been instructed in the
techniques necessary for high speed
riding and are familiar with the
motorcycle's behaviour in all
conditions.
Warning
Continued
High speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.
Note:
• Cruise control may not function if
there is a malfunction with the ABS
system and the ABS warning light
is illuminated.
• Cruise control will continue to
function if a riding mode is selected
with ABS set to Off-Road or Off.
• Cruise control will continue to
function if ABS has been disabled.
Tiger 1200 XR Only
The cruise control buttons are located
on the right hand switch housing and
can be operated with minimum
movement by the rider.
RES /+
SET /-
ON
2
1
1. Cruise control RES/+ button
2. Cruise control SET/- button