User's Manual

General Information
105
Instrument SCROLL Button
When the SCROLL button is pressed
and released it will scroll through the
menu visible in the instrument's display
screen.
MODE Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the multifunction
display screen. Further presses of the
mode button will scroll through the
available riding modes (see Riding Mode
Selection on
page 84
).
Pressing and holding the MODE button
will provide direct access to a Riding
Mode’s Configuration Menu (see Riding
Mode Configuration on
page 87
).
Throttle Control
2
1
3
1. Throttle open position
2. Throttle closed position
3. Cruise control cancel position
This Triumph model has an electronic
throttle twist grip to open and close the
throttle via the engine control unit.
There are no direct-acting cables in the
system.
The throttle grip has a resistive feel to it
as it is rolled rearwards to open the
throttle. When the grip is released it will
return to the throttle closed position by
its internal return spring and the
throttle will close.
From the closed position, the throttle
twist grip can be rolled forward 3 - 4
mm to deactivate the cruise control (see
page 109
).
There are no user adjustments for the
throttle control.
If there is a malfunction with the
throttle control the Malfunction
Indicator Light (MIL) becomes
illuminated and one of the following
engine conditions may occur:
• MIL illuminated, restricted engine
RPM and throttle movement
• MIL illuminated, limp-home mode
with the engine at a fast idle
condition only
• MIL illuminated, engine will not
start.
For all of the above conditions contact
an authorised Triumph dealer as soon
as possible to have the fault checked
and rectified.