User's Manual

General Information
103
Models without Daytime Running
Lights (DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
Note:
• A lighting on/off switch is not fitted
to this model. The position light,
rear light and licence plate light all
function automatically when the
ignition is turned to the ON
position.
• The headlight will function when
the ignition is turned on and the
engine is running.
Rider’s Heated Seat Switch (if
fitted)
The rider’s heated seat will only heat
when the engine is running. When the
rider’s heated seat is switched on, then
the rider’s heated seat symbol will
appear in the display. The selected heat
level will also be indicated by the colour
of the symbol.
For more information, see
page 127
.
Left Handlebar Switches
Tiger 1200 XR Only
4
5
1
2
3
6
1. Headlight dip switch
2. Direction indicator switch
3. Horn button
4. Instruments SELECT button
5. Instruments SCROLL button
6. MODE button
Headlight Dip Switch
High or dip beam can be selected with
the headlight dip switch. To select high
beam, push the switch forward. To
select dip beam, push the switch
rearwards. When the high beam is
turned on, the high beam indicator light
will illuminate in the tachometer.