User's Manual

General Information
101
MODE Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the display screen.
Further presses of the MODE button will
scroll through the available riding modes
(see Riding Mode Selection on
page 84
).
Press and hold the MODE button
provides direct access to a riding
mode’s configuration menu.
For more information on riding mode
selection and configuration, see
page
87
).
Direction Indicator Switch
When the indicator switch is pushed to
the left or right and released, the
corresponding direction indicators will
flash on and off. To turn off the
indicators, push and release the switch
in the central position.
Models Equipped with Automatic
Self-Cancelling Indicators
A short press and release of the
indicator switch to the left or right will
cause the corresponding direction
indicators to flash on and off three
times, then go off.
A longer press and release of the
indicator switch to the left or right will
cause the corresponding direction
indicators to flash on and off until they
are cancelled as follows:
The indicator self-cancel system
becomes active eight seconds after
operating a direction indicator. Eight
seconds after turning the direction
indicator on and after riding a further
65 metres, the indicator self-cancel
system will automatically turn off the
indicators.
To disable the indicator self-cancel
system refer to the Bike Setup section
on
page 49
.
The indicators can be cancelled
manually. To manually turn off the
indicators, press and release the
indicator switch in the central position.
Joystick Button
The Joystick is used to operate the
following functions of the instruments:
• Up - scroll the menu from the
bottom to the top
• Down - scroll the menu from the
top to the bottom
• Left - scroll the menu to the left
• Right - scroll the menu to the right
• Centre - press to confirm selection.
Horn Button
When the horn button is pushed, with
the ignition switch turned to the ON
position, the horn will sound.
Heated Grips Switch
The heated grips will only heat when
the engine is running.
When the heated grips are switched on,
the heated grips symbol will appear in
the display and the selected heat level
will be shown.