User's Manual

Instruments
76
To reset TRIP 1 or TRIP 2:
• Press the SCROLL button to select
the required trip meter to reset,
either TRIP 1 RESET or TRIP 2
RESET.
• Press the SCROLL button to select
CONFIRM, then press the SELECT
button.
• All items within the selected trip
meter will be immediately reset to
zero and the display will return to
the TRIP SETUP menu.
Trip 2 Display
TRIP 2 DISPLAY
ENABLE
TRIP 2 DISPLAY (ENABLE Shown)
To enable or disable the TRIP 2 DISPLAY:
• Press the SCROLL button to select
TRIP 2 DISPLAY, then press the
SELECT button.
• Press the SCROLL button to select
ENABLE or DISABLE.
• Press the SELECT button to confirm
the selection and return to the
TRIP SETUP menu.
Auto Reset
The AUTO RESET function applies to
TRIP 2 only. TRIP 1 must be reset
manually using TRIP 1 RESET as
previously described.
AUTO RESET
4 HRS
AUTO RESET (4 HRS Shown)
To auto reset the trip meters:
• Press the SCROLL button to select
AUTO RESET, then press the
SELECT button.
• Press the SCROLL button to select
OFF, 1 HR, 2 HRS, 4 HRS or 8 HRS.
• Press the SELECT button to confirm
the selection and return to the
TRIP SETUP menu.
• After the ignition has been
switched OFF and the set time has
elapsed, all items within TRIP 2 will
be reset to zero.
Bike Setup
From the SETTINGS menu, select BIKE
SET UP to configure the Anti-Lock
Braking System (ABS) and Traction
Control (TC) settings.
BIKE SETUP
EXIT
ABS
TC
BIKE SETUP Menu
The following menu items are available
for selection:
• EXIT
• ABS
• TC.