User's Manual

Maintenance
194
Battery Removal
Warning
Make sure that the battery terminals
do not touch the motorcycle frame as
this may cause a short circuit or spark,
which would ignite battery gases
causing a risk of personal injury.
To remove the battery:
• Remove the rider's seat.
• Remove the wing nut and remove
the chassis Electronic Control
Module (ECM) cover.
1 2
1. Chassis ECM cover
2. Wing nut
• Remove the battery strap and the
battery cover.
• Disconnect the battery leads,
negative (black) lead first.
12
3
45
1. Negative (black) terminal
2. Positive (red) terminal
3. Battery strap
4. Battery
5. Battery cover
• Take the battery out of the case.
Battery Disposal
Should the battery ever require
replacement, the original battery must
be handed to a recycling agent who will
make sure that the dangerous
substances from which the battery is
manufactured do not pollute the
environment.