User's Manual

73
STARTING AND DRIVING
Starting and Driving
STARTING THE VEHICLE
The Start/Stop button is used to put the
vehicle into Accessory and Drive modes.
Note: The Start/Stop button will only be
operational if a valid key fob is detected
within the vehicle.
ACCESSORY MODE
In Accessory mode, all the electrical
features and controls, except the heating
and air conditioning system, can be
operated but the vehicle cannot be driven.
To put the vehicle in Accessory mode:
1. Ensure the key fob is inside the vehicle.
2. Make sure the brake pedal is NOT
applied.
3. Press the Start/Stop button.
The vehicle enters Accessory mode and
the indicator lights on the DIS illuminate
briefly.
Note: Display functions are not
available immediately, please allow the
information screens to load and
display. As with any personal computer
or infotainment device several seconds
are required to boot before the device
is fully operational. When using
navigation, always set the driver
information system and touch screen
views before driving.
4. The amber indicator light on the
Start/Stop button will illuminate.
The brake pedal indicator light will
illuminate in the DIS.
Note: If left in Accessory mode, the vehicle
will automatically turn itself off after 10
minutes.
DRIVE MODE
In Drive mode, the vehicle’s high voltage
electrical system is engaged, allowing the
vehicle to be driven.
To put the vehicle in Drive mode:
1. Ensure the key fob is inside the vehicle.
2. Depress the brake pedal.
3. Press the Start/Stop button.
TURNING OFF THE VEHICLE
To turn off the vehicle:
1. Ensure the P (Park) is selected.