User's Manual

71
CLIMATE CONTROL
WINDSHIELD DEFROSTER
Touch the icon to operate the
windshield defroster. A blue
indicator will be displayed on the icon when
the defroster is operating.
To provide maximum air flow to the
windshield, activating the defroster
automatically adjusts the climate control
settings as follows:
• Air distribution set to windshield vents.
• Air conditioning is switched on.
• Heating is switched on.
• Blower fan is switched on.
Touch the icon again to switch off the
windshield defroster and return the system
to its previous settings.
REAR WINDOW DEFROSTER
CAUTION: To avoid damage to the
heating elements, do not attach
labels to the rear window. Also, do not
scrape or use abrasive materials to clean
the inside of the rear window.
With the vehicle in Drive mode, touch the
icon to operate the rear window heater. A
blue indicator will be displayed on the icon
when the heater is operating.
The rear window heater will operate
for a period of time before
automatically switching off.
VENTILATION
Air is drawn into the vehicle through the
grille in front of the windshield. Keep the
grille clear of obstructions (leaves, snow,
etc.).
Rotate the thumb wheel left or right to
open and close the face level vents. Move
the louvers up, down, or from side to side to
direct the airflow.
The outer face level vents can be directed
onto the side windows to aid in defogging in
cold weather.
Note: When you open the face level vents,
airflow to the foot and windshield vents is
reduced.
CABIN AIR FILTER
Your Revero has a cabin air filter installed
that prevents pollen, industrial fall-out,
road dust and other particles from entering
the vehicle via the vents.
The cabin air filter must be replaced every
20,000 miles (32,000km). Failure to
replace the air filter will result in reduced
air flow into the vehicle.