User's Manual
Table Of Contents
- Introduction
- Welcome to the Karma Family
- Using This Manual
- Symbols Glossary
- Notes About This Manual
- Electric Vehicle Precautions
- Maintenance and Repairs to Your Vehicle
- Body Repairs
- Vehicle Modifications
- Quality Control
- California Proposition 65
- California Perchlorate Advisory
- Data Recording
- If You Need Assistance
- Reporting Safety Defects
- Overview
- Vehicle Security
- Occupant Safety
- Correct Seating Position
- Steering Column Position
- Integrated Headrests
- Electric Seats
- Seat Heaters
- Driver’s Seat Memory
- Easy Entry and Exit
- About Seat Belts
- Seat Belt Safety
- Wearing the Seat Belt
- Wearing Seat Belts When Pregnant
- Seat Belt Reminder
- Seat Belt Tensioners
- Caring for Seat Belts
- Child Restraints
- Using a Non Latch Child Restraint
- Using a Latch Child Restraint
- Upper Tether Strap Anchorages
- Location of Air Bags
- Important Information
- How the System Works
- Deployment Effects
- Obstruction of Air Bags
- Passenger Air Bag Deactivation
- Air Bag Warning Labels
- SRS Warning Indicator
- Air Bag Service Information
- Vehicle Modifications
- Controls and Operation
- Driver Information System (DIS) USA Specification
- Driver Information System (DIS) Canadian Specification
- Indicator Icons
- Warning and Information Messages
- Wipers and Washers
- Exterior Lighting
- Turn Signals
- Hazard Warning Flashers
- Power Windows
- Exterior Mirrors
- Interior Rear View Mirror
- Using the Touchscreen
- Overview
- Favorites
- Audio
- Navigation
- Phone
- Pairing a Phone
- Minibar
- Using the System
- Ventilation
- Operating Notes
- Starting the Vehicle
- Type Approval
- Selecting a Propulsion Mode
- Driving Modes
- General Information
- Anti-Lock Braking System (ABS)
- Regenerative Braking
- Parking Brake
- Electronic Stability Control (ESC)
- Cruise Control
- Exterior Sound
- Advanced Driver Assistance System (ADAS)
- Lane Departure Warning (LDW)
- Forward Collision Warning (FCW)
- Park Distance Control (PDC)
- Rear View Camera
- Homelink® Transmitter
- Programming a Device
- Entry Gate/Canadian Programming
- Information and Assistance
- Accessory Power Outlets
- USB Connections
- Power
- Maintenance
- General Information
- Scheduled Maintenance
- Owner Maintenance
- Safety
- Fuel and Emission Systems Components
- Opening and Closing the Hood
- Engine Compartment Overview
- Engine Oil
- Brake Fluid
- Power Steering Fluid
- Coolant
- Washer Fluid
- Approved Fluids and Capacities
- Checking the Wiper Blades
- Replacing the Wiper Blades
- Washers
- Cleaning the Exterior
- Cleaning the Solar Roof
- Underhood Cleaning
- Polishing the Body
- Paint Damage and Repair
- Using a Car Cover
- Cleaning the Interior
- Floor Mats
- Vehicle Storage
- Replacing a Fuse
- Engine Compartment Fuse Box
- Fuse Specifications
- Jacking and Lifting the Vehicle
- Transporting the Vehicle
- Attaching the Vehicle Recovery Eye
- Securing the Wheels
- Service Interval Schedules
- Additional Procedures Required at Specific Intervals
- Service Types and Required Procedures
- Wheels and Tires
- Inspection and Maintenance
- Tire Wear
- Tire Pressures
- Replacement Wheels and Tires
- Driving in Low Ambient Temperatures
- Winter Tires and Tire Chains
- Tire Pressure Monitoring System (TPMS)
- Tire Repair Kit
- Safety Precautions
- Using the Tire Repair Kit
- Using the Compressor
- Replacing the Canister/Air Hose Assembly
- Tire Markings
- Uniform Tire Quality Grading
- Loading the Vehicle
- Steps For Determining Correct Load Limit
- Wheels and Tires Glossary
- Technical Specifications
- Index
51
EXTERIOR LIGHTING
Exterior Lighting
EXTERIOR LIGHTING
The exterior lights are controlled by the
left-hand steering column lever.
Turn the rotary control on the end of the
lever to select the required lighting mode.
• OFF
• AUTO: the AUTO setting is the default
setting for head lamps and side lamps.
If the lights are turned off, or if the
ambient light falls below a defined level,
they will automatically be activated.
• Side lamps only
• Side lamps and head lamps
HEAD LAMP LOW BEAM
An indicator light on the DIS will
illuminate when the head lamp low
beams are operating.
HEAD LAMP HIGH BEAM
With the head lamps on, push the
column lever away from the steering
wheel to select high beam. An indicator
light on the DIS will illuminate when high
beam is selected.
To switch back to low beam, pull the lever
towards the steering wheel.
To flash the head lamps on high beam, pull
the lever fully towards the steering wheel
and release it.
HEAD LAMP COURTESY DELAY
The headlamp courtesy delay operates
whenever the vehicle is turned off and the
exterior lighting switch is in the AUTO
position. The head lamps will remain
illuminated for up to two minutes.
Note: The head lamp courtesy delay
settings can be configured to your personal
preference via the touchscreen.
The courtesy delay may be canceled at any
time by either selecting Accessory mode or
turning the exterior lighting switch to the
OFF position.
APPROACH LIGHTING
If the exterior lighting switch is in the AUTO
position, the head lamps will illuminate
when the vehicle is unlocked using the key
fob.
Note: The approach lighting setting can be
configured to your personal preference via
the touchscreen.
DAYTIME RUNNING LAMPS
In certain markets, the side lamps, license
plate lamps and head lamp low beams will
automatically illuminate when the vehicle is
in Drive mode and the exterior lights switch
is in the off position.
Note: The DIS illumination remains off.
REAR FOG LAMPS
With the headlights on, rotate and release
the collar on the lever to turn the rear fog
lamps on.
An indicator illuminates on the DIS
when the fog lights are operating.