User's Manual

36
CHILD RESTRAINTS
To install your child seat with a LATCH
restraint system, slide the child seat until it
engages onto the anchor bars.
Test the security of the child seat, and
ensure it is correctly latched before seating
a child. Attempt to twist the child seat from
side to side and to pull it away from the
vehicle seat, then check that the anchors
are still securely in place.
UPPER TETHER STRAP
ANCHORAGES
WARNING: Always check the upper
tether strap for damage or wear and
tear. A child could be seriously injured or
killed in a sudden stop or collision if the child
restraint upper tether strap is damaged or
not functioning properly.
Upper tether anchorages are provided at
each seating position equipped to accept
LATCH child restraints.
Note: Always ensure that if an upper tether
is provided, it is secured and tightened
properly, as this provides maximum
protection for a child.
Anchor points for the upper LATCH child
restraints are located behind the rear seat
headrests.
Note: Due to the restricted access in the
rear of your Revero, the easiest way to
actually view the upper anchorage point is
by standing outside the vehicle and looking
through the rear window.
With the rear door open, reach through the
door and remove the protective cover
located behind the headrest.