User's Manual
General Information
98
Helmet Hook
A helmet can be secured to the
motorcycle using the helmet hook
located on the left hand side of the
motorcycle, beneath the rider's seat.
1. Helmet hook
To attach a helmet to the motorcycle,
remove the rider's seat (see page
95)
and loop the helmet chin strap over the
hook.
To secure the helmet, refit the seat and
lock into position (see page
95).
Tool Kit, Handbook and the
Triumph Accessory D-Lock
The tool kit and handbook are located
beneath the passenger seat.
Space is provided under the passenger
seat to store a Triumph accessory D-lock
(available from your Triumph dealer).
Secure the lock as follows:
Remove the passenger seat (see
page
94).
Release the straps and remove the
handbook and tool kit.
Position the U-section of the lock to the
rear mudguard tray support features,
ensuring the open end faces towards
the front of the motorcycle.
Position the lock body into the rear
mudguard tray as shown below.
1. Lock U-section
2. Lock body
3. Straps
Fit the tool kit and handbook above the
D-lock and secure using the tool kit
straps.
Refit the passenger seat (see page
94).
Warning
Never ride the motorcycle with
helmet(s) secured to the helmet hook.
Riding the motorcycle with helmet(s)
secured to the helmet hook may cause
the motorcycle to become unstable
leading to loss of motorcycle control
and an accident.
ciuw
1
cjhl
2
1
3