User's Manual

General Information
95
Rider's Seat
1. Rider’s seat
To remove the rider’s seat, remove the
passenger seat (see page
94).
Grasp the rider’s seat on either side, and
slide it rearwards and upwards. If
equipped with heated seats, disconnect
the heated seat’s electrical connector
for complete removal from the
motorcycle.
To refit the seat, reconnect the heated
seat’s electrical connector (if equipped).
Engage the seat's front rail into the
bracket at the rear of the fuel tank and
lower the rear rail into the rear brackets.
Push down firmly on the rear of the
seat. Refit the passenger seat (see
page
94).
1
Warning
The rider’s seat is only correctly
retained and supported once the
passenger seat is correctly fitted.
Never ride the motorcycle with the
passenger seat detached or removed,
as the front seat will not be secured
and may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.