User's Manual

General Information
83
See page 28 for full details of the TC
disabled warning light operation and its
associated instrument warning messages.
Warning
If the TC system is not functioning,
care must be taken when accelerating
and cornering on wet/slippery road
surfaces to avoid rear wheel spin.
In the event of a fault, the TC disabled
warning light may be accompanied by
the engine management system
malfunction indicator light and/or the
ABS warning light.
Do not continue to ride for longer
than is necessary with any of the
above warning lights illuminated.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Hard acceleration and cornering in
this situation may cause the rear
wheel to spin resulting in loss of
motorcycle control and an accident.
Warning
If a fault occurs with the optimised
cornering TC system, the TC disabled
warning light will illuminate and the
message TC SYSTEM - CORNERING TC
DISABLED will be displayed in the
multifunction display.
In this situation, the TC system will
continue to operate but without the
optimised cornering function, provided
that:
• There are no other faults with the
TC system.
• TC has NOT been disabled by the
rider (see Bike Setup on page
50 or
Riding Mode Configuration on
page
62).
Care must be taken when accelerating
and cornering on wet/slippery road
surfaces to avoid rear wheel spin.
In the event of a fault, the TC disabled
warning light may be accompanied by
the engine management system
malfunction indicator light and/or the
ABS warning light.
Do not continue to ride for longer
than is necessary with any of the
above warning lights illuminated.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Hard acceleration and cornering in
this situation may cause the rear
wheel to spin resulting in loss of
motorcycle control and an accident.