User's Manual

General Information
81
System Calibration
The TSAS system will recalibrate
adjustment motors under the following
conditions:
• If the battery has been disconnected
for any reason.
• If a fault occurs with the TSAS
system during normal operation.
The warning light will flash twice every
second during system recalibration.
1. TSAS warning light
2. Instrument message
To allow the system to calibrate
correctly, the following procedure must
be adhered to:
• Turn the ignition on. Do not start the
engine.
• Wait for the warning light to stop
flashing indicating that adjustment
motor calibration is complete.
• Start the engine. If the warning light
resumes flashing. the adjustment
motors are being recalibrated due to
low battery voltage.
• Wait for the warning light to stop
flashing before riding the
motorcycle.
Failure to follow this procedure will
cause the recalibration to be halted and
the warning light to remain lit.
In this case the warning light will
extinguish once the recalibration is next
allowed to complete.
OFF-ROAD
TSAS SYSTEM
CALIBRATING
PLEASE WAIT
PRESS SELECT
TO CLEAR
1
2