User's Manual

General Information
72
Direction Indicator Switch
When the indicator switch is pushed to
the left or right and released, the
corresponding direction indicators will
flash on and off. To turn off the
indicators, push and release the switch
in the central position.
Models Equipped with Automatic
Self-Cancelling Indicators
A short press and release of the
indicator switch to the left or right will
cause the corresponding direction
indicators to flash on and off three
times, then go off.
A longer press and release of the
indicator switch to the left or right will
cause the corresponding direction
indicators to flash on and off until they
are cancelled as follows:
The indicator self-cancel system
becomes active eight seconds after
operating a direction indicator. Eight
seconds after turning the direction
indicator on and after riding a further
65 metres, the indicator self-cancel
system will automatically turn off the
indicators.
To disable the indicator self-cancel
system refer to the Bike Setup section
on page
50.
The indicators can be cancelled
manually. To manually turn off the
indicators, press and release the
indicator switch in the central position.
Horn Button
When the horn button is pushed, with
the ignition switch turned to the ON
position, the horn will sound.
Instrument SELECT Button
When the SELECT button is pressed and
released it will select the menu
highlighted in the multifunction display
screen.
Pressing and holding the SELECT button
when the motorcycle is stationary will
activate the Settings Menu in the
multifunction display (see Settings Menu
on page
48).
Instrument SCROLL Button
When the SCROLL button is pressed and
released it will scroll through the menu
visible in the instrument's display
screen.
MODE Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the multifunction
display screen. Further presses of the
mode button will scroll through the
available riding modes (see Riding Mode
Selection on page
58).
Pressing and holding the MODE button
will provide direct access to a Riding
Mode’s Configuration Menu (see Riding
Mode Configuration on page
62).