User's Manual

General Information
71
Left Handlebar Switches
1. Headlight dip switch
2. Direction indicator switch
3. Horn button
4. Instruments SELECT button
5. Instruments SCROLL button
6. MODE button
7. Front fog lights switch (if fitted)
8. Heated grips switch (if fitted)
Headlight Dip Switch
High or dip beam can be selected with
the headlight dip switch. To select high
beam, push the switch forward. To select
dip beam, push the switch rearwards.
When the high beam is turned on, the
high beam indicator light will illuminate
in the tachometer.
Pass Function
With the headlight dip switch set to the
dip beam position, pressing the bottom
of the switch will activate the pass
function.
When pressed, the headlight high beam
will be switched on. It will remain on as
long as the switch is held in and will turn
off as soon as the switch is released.
Note:
• A lighting on/off switch is not fitted
to this model. The position light, rear
light and licence plate light all
function automatically when the
ignition is turned to the ON position.
• The headlight will function when the
ignition switch is turned to the ON
position and the engine is running.
There are two alternate ways to turn on
the headlight without the engine
running:
• Pull in the clutch lever then turn the
ignition to the ON position. The
headlight will be on and will remain
on when the clutch lever is released.
• With the ignition on and the
headlight dip switch set to the dip
beam position, pressing the bottom
of the switch will activate the
headlight. The headlight will remain
on when the switch is released.
The headlight will go off while pressing
the starter button until the engine
starts.
4
5
1
2
3
6
7
8