User's Manual
General Information
56
Set Units
After entering the SET UNITS screen, the
instruments will prompt for DISTANCE.
Press the SCROLL button to select MILE
or KM and press SELECT.
Units Select
The instruments will now prompt
ECONOMY.
Note:
• If DISTANCE has been set to MILE,
the options available will be MPG
(UK) or MPG (US).
• If DISTANCE has been set to KM, the
options available will be KM/L or
L/100 KM.
Use the SCROLL button to select the
desired unit and press SELECT.
Note:
• If DISTANCE has been set to MILE,
the instruments will now prompt
TEMP (temperature).
• If DISTANCE has been set to KM, the
temperature display will be
automatically set to °C.
If DISTANCE has been set to MILE, use
the SCROLL button to select either °F or
°C and press SELECT.
If TPMS is fitted, the instruments will
now prompt PRESSURE.
Use the SCROLL button to select either
PSI, BAR or kPa.
Press SELECT to save your settings and
return to the DISPLAY SETUP menu.
Set Clock
After entering the SET CLOCK screen,
the instruments will prompt for 12 HR or
24 HR.
Press the SCROLL button to select the
desired clock display and press SELECT.
Set Clock (24 HR Shown)
The instruments will now prompt SET
HOUR. Use the SCROLL button to select
the desired hour display and press
SELECT.
The instruments will now prompt SET
MINUTE. Use the SCROLL button to
select the desired minute display and
press SELECT to save and return to the
DISPLAY SETUP menu.
Brightness
After entering the BRIGHTNESS screen,
press the SCROLL button to adjust the
instrument brightness using the
adjustment slider between levels 1
(lowest) to 10 (highest). Press the SELECT
button to save your selection and return
to the DISPLAY SETUP menu.
Brightness Adjust
DISTANCE
MILES
SET CLOCK
24 HR
BRIGHTNESS