User's Manual

General Information
51
The following menu items are available
for selection:
Explorer XR and Explorer XC Only
• EXIT
• ABS - ABS disable/enable
• TC - TC disable/enable.
Explorer XR
X and Explorer XCX -
All Models
• EXIT
• TSAS
• INDICATORS
• ABS - ABS disable/enable
• TC - TC disable/enable.
Explorer XR
T and Explorer XCA Only
• EXIT
• TSAS
• HILL HOLD
• INDICATORS
• ABS - ABS disable/enable
• TC - TC disable/enable.
Note:
• Selecting EXIT will return the display
to the SETTINGS menu.
ABS Disable/Enable
It is possible to temporarily disable the
ABS system. The ABS system cannot be
permanently disabled, it will be
automatically enabled when the ignition
is turned off and then on again.
Warning
Do not attempt to adjust the ABS
settings while the motorcycle is in
motion as this may lead to loss of
motorcycle control and an accident.
Warning
Selecting ABS DISABLE will disable the
anti-lock braking system.
The optimised cornering ABS (if
equipped) will also be disabled and the
ABS settings stored for each riding
mode will be overridden, regardless of
whether they are set to Road, Off-
Road or OFF.
ABS, optimised cornering ABS (if
equipped) and the riding mode ABS
settings will not be enabled again until
ENABLE is selected from the ABS
menu as described in the following
procedure, or the ignition is turned off
then on again.
If the ABS is disabled, the brake
system will function as a non-ABS
braking system. In this situation
braking too hard will cause the wheels
to lock, and may result in loss of
motorcycle control and an accident.