User's Manual

General Information
49
Show Warnings
Selecting SHOW WARNINGS will exit the
settings menu and display all active
warning or information messages in the
multifunction display screen.
See page
35 for more information on
warning and information messages.
Riding Modes
Selecting Riding Modes allows the rider
to configure the ABS, MAP, TC and TSAS
settings for each available riding mode.
See page
62 for more information on
riding mode configuration.
Trip Setup
Access the settings menu as described
on page
48 and select TRIP SETUP.
After entering the TRIP SETUP menu,
press and release the SCROLL button
until the desired item is highlighted.
Press the SELECT button to enter the
item.
Trip Setup Screen
The following menu items are available
for selection:
EXIT
TRIP 1 RESET
TRIP 2 RESET
TRIP 2 DISPLAY
AUTO RESET.
Note:
Selecting EXIT will return the display
to the SETTINGS menu.
Trip 1 and Trip 2 Reset
After entering TRIP 1 or TRIP 2 RESET,
the instruments will prompt you to
select CONFIRM or CANCEL.
Trip 1 Reset Shown
To reset the trip meter, use the SCROLL
button to select CONFIRM, then press
the SELECT button.
All items within the selected trip meter
will be immediately reset to zero and the
display will return to the TRIP SETUP
menu.
Trip 2 Display
It is possible enable or disable the trip 2
display in the home screen.
To enable or disable the trip 2 display,
press the SCROLL button to select
TRIP 2 DISPLAY, then press the SELECT
button.
TRIP SETUP
EXIT
TRIP 1 RESET
TRIP 2 RESET
TRIP 2 DISPLAY
AUTO RESET
TRIP 1 RESET
CONFIRM