User's Manual
General Information
35
Warning and Information
Messages
Warning Messages
The following Warning
messages may be displayed if
a fault is detected:
• OIL PRESSURE LOW (see page
32)
• BATTERY LOW (see page
24)
• ABS SYSTEM DISABLED (see page
25)
• CORNERING ABS DISABLED
(see page
25)
• TC SYSTEM DISABLED (see page
28)
• CORNERING TC DISABLED
(see page
28)
• TSAS SYSTEM FAULT (see page
33)
• FRONT/REAR TYRE PRESSURE LOW
(see page
32)
• SENSOR SIGNAL FRONT/REAR TYRE
(see page
84).
Information Messages
The following information
messages may be displayed:
• TSAS SYSTEM CALIBRATING -
PLEASE WAIT (see page
33)
• TPMS - BATTERY LOW FRONT/REAR
TYRE (see page
33)
• HILL HOLD ACTIVATED (see page
121)
• HILL HOLD DEACTIVATED
(see page
121)
• HILL HOLD UNAVAILABLE
(see page
121).
When a warning or information message
is activated, the message will be
accompanied by the relevant warning or
information symbol on the left hand side
of the multifunction display.
It is possible for multiple warning and
information messages to be displayed
when a fault occurs. Where this is the
case, warning messages will take priority
over information messages and the
warning symbol will be displayed on the
left hand side of the multifunction
display.
The number of currently active warning
and information messages is displayed
over the warning/information symbol.
1. Symbol (warning symbol shown)
2. Multiple messages indicated
Use the SCROLL button to scroll through
the messages being displayed.
Press the SELECT button to
acknowledge and hide each message.
OFF-ROAD
WARNING
TTC SYSTEM
3
1
2