User's Manual

General Information
31
Engine Management System
Malfunction Indicator Light (MIL)
The Malfunction Indicator
Light (MIL) illuminates when
the ignition is switched on to
indicate that the engine
management system is working, but
should go off when the engine is started.
The MIL should not illuminate when the
engine is running.
If the MIL becomes illuminated when the
engine is running, this indicates that a
fault has occurred in one or more of the
systems controlled by the engine
management system. In such
circumstances, the engine management
system will switch to limp-home mode so
that the journey may be completed, if
the fault is not so severe that the engine
will not run.
Note:
If the MIL flashes when the ignition
is switched on, contact an
authorised Triumph dealer as soon
as possible to have the situation
rectified. In these circumstances the
engine will not start.
High Coolant Temperature Warning
Light
With the engine running, if the
engine coolant temperature
becomes dangerously high,
the high coolant temperature
warning light in the tachometer will
illuminate.
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the MIL illuminated. The fault may
adversely affect engine performance,
exhaust emissions and fuel
consumption. Reduced engine
performance could cause a dangerous
riding condition, leading to loss of
motorcycle control and an accident.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Caution
Stop the engine immediately if the
high coolant temperature warning
light illuminates. Do not restart the
engine until the fault has been
rectified.
Severe engine damage will result from
running the engine when the high
coolant temperature warning light is
illuminated.