User's Manual

General Information
29
TC SYSTEM - CORNERING TC DISABLED
(models equipped with optimised
cornering TC only)
1. Traction control disabled warning
light
2. Instrument message
The message TC SYSTEM - CORNERING
TC DISABLED indicates that optimised
cornering TC is not functioning.
TC will continue to operate but without
the optimised cornering function,
provided that:
• TC has no other faults
• TC has not been disabled by the
rider (see Bike Setup on page
50 or
Riding Mode Configuration on
page
62).
See also Traction Control on page
82.
OFF-ROAD
TC SYSTEM
CORNERING TC
DISABLED
CHECK MANUAL
PRESS SELECT
TO CLEAR
1
2
Warning
If a fault occurs with optimised
cornering traction control, the TC
disabled warning light will illuminate
and the message TC SYSTEM -
CORNERING TC DISABLED will be
displayed in the multifunction display.
In this situation, the traction control
system will continue to operate but
without the optimised cornering
function, provided that:
• TC has no other faults
• TC has not been disabled by the
rider (see Bike Setup on page
50 or
Riding Mode Configuration on
page
62).
Care must be taken when accelerating
and cornering on wet/slippery road
surfaces to avoid rear wheel spin.
The TC disabled warning light may be
accompanied by the engine
management system malfunction
indicator light and/or the ABS warning
light.
Do not continue to ride for longer
than is necessary with any of the
above warning lights illuminated.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Hard acceleration and cornering in
this situation may cause the rear
wheel to spin resulting in loss of
motorcycle control and an accident.