User's Manual

General Information
27
Cruise Control Light (If equipped)
The cruise control can only be
activated when the
motorcycle is travelling at a
speed between 19 to 100 mph
(30 to 160 km/h) and is in 3
rd
gear or
higher. When activated, the cruise
control light in the tachometer will be
illuminated (see page
76).
1. Cruise control light
Alarm/Immobiliser Indicator Light
This Triumph model is fitted
with an engine immobiliser
which is activated when the
ignition switch is turned to
the OFF position. If the motorcycle is
fitted with a Genuine Triumph Accessory
alarm, the immobiliser will operate as
normal but the alarm/immobiliser light
will operate as described below.
With Alarm Fitted
The alarm/immobiliser light will only
illuminate when the conditions described
in the Genuine Triumph Accessory alarm
instructions are met.
Without Alarm Fitted
When the ignition switch is turned to
the OFF position, the alarm/immobiliser
light will flash on and off for 24 hours to
show that the engine immobiliser is on.
When the ignition switch is turned to
the ON position the immobiliser and the
indicator light will be off.
If the indicator light remains on it
indicates that the immobiliser has a
malfunction that requires investigation.
Contact an authorised Triumph dealer as
soon as possible to have the fault
checked and rectified.
Warning
Cruise control must only be used
where you can ride safely at a steady
speed.
Cruise control should not be used
when riding in heavy traffic, on roads
with sharp/blind bends or when they
are slippery.
Using cruise control in heavy traffic,
on roads with sharp/blind bends or
when they are slippery, may result in
loss of motorcycle control and an
accident.
1