User's Manual
Maintenance and Adjustment
153
Rear Suspension
Rear Suspension Adjustment
The following Explorer models are
equipped with Triumph Semi Active
Suspension (TSAS):
• Explorer XRX
• Explorer XRX-LRH
• Explorer XRT
• Explorer XCX
• Explorer XCX-LRH
• Explorer XCA.
See page
80 for more details on TSAS
settings and adjustment.
Explorer XR and Explorer XC Models
The Rear Suspension Unit (RSU) on the
Explorer XR and Explorer XC models is
adjustable for spring preload and
rebound damping.
Note:
• The motorcycle is delivered from the
factory with the rear suspension set
to the Solo (Normal) riding settings,
as shown in the Rear Suspension
Setting Chart (see page
154).
Spring Pre-Load Adjustment
1. Spring pre-load adjuster
The spring pre-load adjuster is situated
on the right hand side of the motorcycle,
at the top of the rear suspension unit.
To adjust the spring preload setting
rotate the 5 mm hexagon adjuster
clockwise to increase, or anticlockwise to
decrease.
Note:
• The setting is measured as the
number of adjuster turns
anticlockwise from the fully
clockwise (closed) position.
Warning
Ensure that the correct balance
between front and rear suspension is
maintained. Suspension imbalance
could significantly change handling
characteristics leading to loss of
motorcycle control and an accident.
Refer to the front and rear
suspension setting charts for further
information or consult your dealer.
civl
1