User's Manual
How to Ride the Motorcycle
123
The rear brake will remain applied until:
• The system detects that the rider is
attempting to move off.
• Hill hold control is manually
deactivated by the rider.
Deactivation
The hill hold control system will
automatically deactivate when it detects
that the rider is attempting to move off.
The system will progressively release the
rear brake to assist the rider in moving
off.
The hill hold control system can also be
manually deactivated by a second firm
squeeze of the front brake lever.
The message HILL HOLD DEACTIVATED
will be displayed briefly in the
multifunction display.
1. Instrument message
Hill Hold Unavailable Message
If when attempting to activate the hill
hold control system, the message HILL
HOLD UNAVAILABLE - CHECK MANUAL is
displayed, this indicates one or more of
the following:
• The activation conditions described
on page
122 have not been met.
• There is a fault with the ABS or
engine management systems and
the ABS and/or MIL warning lights
are illuminated. See Warning Lights
on page
24.
The hill hold control system can be
enabled or disabled (see Bike Setup on
page
50).
OFF-ROAD
H
HILL HOLD
DEACTIVATED
1
OFF-ROAD
H
HILL HOLD
UNAVAILABLE
CHECK MANUAL
1