User's Manual

DRIVING CONTROLS
ANDLING AND POWERTRAIN CONTROLS
✷ ♦ ✷ ❧
➎ ➏ ➐ ➑ ➒ ➐ ➢ ➛ ↕ ➙ ✃ ➞ ➡
➯
↔ ➣ ↕ ➞ ➙ ➜ ↕ ➔ ➠ ➝ ↔
➬
➛ ➜ ➞ ➙ ➣ ➢ ➛
instrument cluster will change
dependent on the powertrain mode
selected. See Handling and Powertrain
Display, page 3.35.
The different gear change strategies outlined
above are only relevant with automatic mode
selected.
The mode selected will remain active, until
the selection is changed, the ignition is
switched off, or the active dynamics panel is
deactivated.
When the active dynamics panel is off, the
Powertrain display in the right-hand display
will show Normal, see Handling and
Powertrain Display, page 3.35.
NOTE: The use of the Track setting on
the public road is not recommended.
The Track setting is strictly intended for
high performance track/off road use
only.
➳
❀
✬ ✸ ✬
✿
✮
✿
✬ ✰ ✪
❯ ✑ ✡ ☛ ✌ ✑ ✡ ◆ ✡ ✑ ✥ ✝ ✍ ✡ ✥ ✔ ✒
❑
✡ ✠ ✟ ✌ ✥ ☛
✳
✥ ☛ ✟ ☛
✴
powertrain setting with automatic gear shifts
selected, the transmission adapts to an
economical shift strategy during periods of
gentle driving. This is determined by the
vehicle speed, acceleration, braking and road
gradient.
Depending on the current active shift
strategy, the word "NORMAL!, "SPORT! or
"TRACK! changes color to green when
economy mode is active. For information on
other ways to save fuel, see Economical
driving, page 2.14.
NOTE: When the active dynamics panel
is on, the current handling and
powertrain modes will appear in orange
on the instrument cluster. When the
panel is off, the handling and powertrain
modes will appear in white.