User's Manual

DRIVING CONTROLS
➶
TARTING AND DRIVING
✷ ♦ ♥ ❧
❚ ✑ ✡
✳
✠ ✡ ✡ ☛ ✔ ✌ ✟ ✌ ✥ ✝
❍
✒
❏
✡
❏
✌ ✡ ☛ ✤ ✔
❍
✟ ✝
✵
❼
6
❼ ✦ ✡ ✡ ✌
(2 meters) from the rear of the vehicle, with
an additional line at 3.3 feet (1 meter).
The yellow dynamic box extends back 10 feet
(3 meters) from the rear of the vehicle, with
additional lines at 6.6 feet (2 meters) and
3.3 feet (1 meter). The yellow box will curve, in
relation to steering angle, indicating the
current path of the vehicle.
NOTE: The rear view camera is for
guidance only and is not intended to
replace the driver!s visual checks for
obstructions when maneuvering. The
rear view camera may not show some
obstructions in certain ambient light or
weather conditions.
NOTE: The steering guide grid will not be
displayed if a steering angle fault exists.
The RVC is automatically activated when
reverse gear is selected and automatically
deactivated 10 seconds after a forward gear is
selected or immediately if the vehicle!s
forward speed exceeds 6 mph (10 kph).
The RVC can be manually activated by
selecting REAR VIEW CAMERA from the IRIS
APPS screen.
When the RVC has been manually
activated, it can be deactivated by
touching the on-screen icon. The RVC will
also be deactivated if the screen is touched
anywhere below the status bar or any of the
physical IRIS buttons are pressed.
NOTE: The RVC cannot be manually
deactivated if it has been automatically
activated by selecting reverse gear.
McLaren Track Telemetry
❵ ❛ ❜ ❝ ✾ ❝
❊
❞ ❡
❅ ✪
❂ ❀ ❃ ❈
✭ ✪ ✸
❡
✭
❈ ❀
❥
Telemetry system is intended for
track use only. The driver is
responsible for safety and
compliance at all times.
➫
✲ ✪ ✭ ✲ ✱ ✪ ❣
M
The McLaren Track Telemetry system
provides timing data recording and
graphical visualization for track use, e.g.
circuits and hill-climbs.
• Live data recording can be triggered
manually or linked to vehicle movement.
• During a recording, graphical displays
are provided for timing data,
performance delta, track maps and
vehicle speed.
• Track performance can be analyzed in a
data viewer, and navigated via the lap
number, track position or track distance.
• Custom track maps are created
automatically and can be manually
edited. Multiple track layouts or
configurations are supported for each
venue.