User's Manual

COMFORT AND CONVENIENCE
INDOWS
❖ ♦ ▲
➎ ➏ ➐ ➑ ➒
➷
✃ ➣ ➢ ➛ . ➛ ➢ ↕ ➤ ➝ ➛ ↕ ➔ ↕ ➙ ↔ ➤ ➤ ➛ ➔ ➔ ➞ ➡
➬
mode, window control will not be
available. If accessory mode is entered
just after the engine has been stopped
using the START/STOP button and the
windows are not fully closed, window
control will still be available until:
• the windows are fully closed
• the vehicle enters sleep mode
• a door is opened
❜
✪ ✽ ✪ ✻ ✻ ✱ ✸ ✹ ✻ ❅ ✪ ❣ ✱ ✸ ✰ ✬ ❣ ✽
❚ ✑ ✡
❋
✥ ☛ ✤ ✒
❋
✔ ✧ ✓ ✔ ✌
❍
✡ ✠ ✡ ✔ ✡ ✌ ✥ ✦ ✌ ✑ ✡
❍
✟ ✌ ✌ ✡ ✠
✴
✑ ✟ ✔
been discharged or disconnected, or if the
anti-trap feature has been activated.
Ensure that both doors are closed and the
ignition is switched on.
Push switches (1) and (2) downwards until the
windows are open and hold them in this
position for 5 seconds.
Pull both switches upwards until the windows
are closed and hold them in this position for
5 seconds.
The windows are now reset.
If this does not resolve the issue, please
contact your McLaren Retailer immediately.
❛
✸ ✻ ✱
➪
✻ ✭
❈ ➭ ➭
✭ ✬ ✻ ✪
❀
✻ ✱ ✬ ✸
❵ ❛ ❜ ❝ ✾ ❝
❊
❞
✶ ✬ ✸ ✬ ✻ ✼ ✪
❈
✲ ✪
❀
❅ ✱ ✼ ✰ ✭ ✪ ✸
unattended in the vehicle, they could
be injured by the movement of the
window.
Anti-trap protection will stop windows closing
if an obstruction or resistance is detected.
If the anti-trap protection is triggered, check
the window and the window aperture and
remove any obstruction, before operating the
windows again. In the event of an anti-trap
event when closing the door, see Closing a
door, page 1.9.