User's Manual

DRIVING CONTROLS
UNNING IN
✷ ♦ ❖ ❫
❮ & ➁ ➁ ➂ ➁ ➃ ➂ ➁
Running in
◗
❍
✔ ✡ ✠ ◆ ✡ ✌ ✑ ✡ ✦ ✒ ✍ ✍ ✒
❋
✥ ☛
✳
✠ ✓ ☛ ☛ ✥ ☛
✳
✥ ☛ ✥ ☛ ✔ ✌ ✠ ✓ ✝ ✌ ✥ ✒ ☛ ✔
when the vehicle is new or if any of these
components have been replaced.
➳ ✸ ✹ ✱ ✸ ✪
❈
✸ ✰ ✹ ✪
❈
✭ ❤ ✬
●
➋
✒ ✠ ✌ ✑ ✡ ✦ ✥ ✠ ✔ ✌ ❼ ✎
➊
✧ ✥ ✍ ✡ ✔
➚
✗
♠
✙ ✙ ✙
✵
✧ P ✕
• drive at varying road and engine speeds
• do not drive faster than the maximum
speed limit of the road, or 150 mph
(240 kph)
• do not use your vehicle on a race track
• avoid heavy loads on the engine (driving
at full throttle)
• avoid driving at engine speeds less than
2,000 rpm
• avoid running at constant speed and
load for long periods
• avoid using kickdown
• do not downshift for additional engine
braking
• avoid stopping the engine within
2 minutes of high speed and high load
running
• avoid idling the engine for more than
10 minutes
After the 625 miles (1,000 km) running in
period, you may gradually use the vehicle!s
full performance.
NOTE: Failure to observe the engine and
gearbox operating limits during the
running in period may lead to premature
wear or damage.
NOTE: These running in instructions also
apply for the first 625 miles (1,000 km)
after the engine or transmission has
been replaced.
ENVIRONMENTAL: This advice will assist
in improving fuel economy and should
be adopted as normal driving practice
even after the running in period.
✩ ✭
❈
❥ ✪ ✽
❲ ✡
❋ ❍
✠ ✟
✵
✡ ✔ ✠ ✡ ➥ ✓ ✥ ✠ ✡ ✟ ☛ ✥ ☛ ✥ ✌ ✥ ✟ ✍
❍
✡ ✤ ✤ ✥ ☛
✳
✥ ☛
period. Avoid heavy braking situations for the
first 625 miles (1,000 km).
Normal/Road use
Y
Allow the engine to warm up before
driving at high engine speeds and high
loads. Limit engine speed to 5,000 rpm
until the engine reaches full operating
temperature.
• Avoid stopping the engine within
2 minutes of high speed/high load
running.
• Avoid idling the engine for more than
10 minutes.