User's Manual

page 5
The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise
reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings.
3 Antenna installation
To comply with the RF exposure requirements for 2G/3G cellular radio of the FCC following requirements
have to be fulfilled:
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operated in conjunction with any antenna or
transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be
used in mobile or fixed applications only.
For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed
4.91 dBi
at 850 MHz & 900 MHz
9.58 dBi
at 1800 MHz to 2100 MH
for satisfying RF exposure compliance.
It must be ensured by the OEM that the end user has no manual or instructions to remove or install the
RF unit of the device.